An intermediate wavelength, weakly nonlinear theory for the evolution of capillary gravity waves

A new nonlinear evolution equation is derived for surface solitary waves propagating on a liquid-air interface where the wave motion is induced by a harmonic forcing. Instead of the traditional approach involving a base state of the long wave limit, a base state of harmonic waves is assumed for the perturbation analysis. This approach is considered to be more appropriate for channels of length just a few multiples of the depth. The dispersion relation found approaches the classical long wave limit. The weakly nonlinear dispersive waves satisfy a KdV-like nonlinear evolution equation with steeper nonlinearity.     

NONLINEAR VIBRATION OF CIRCULAR SANDWICH PLATES UNDER CIRCUMJACENT LOAD

Based on von Karman plate theory, the issue about nonlinear vibration for circular sandwich plates under circumjacent load with the loosely clamped boundary condition was researched. Nonlinear differential eigenvalue equations and boundary conditions of the problem were formulated by variational method and then their exact static solution can be got. The solution was derived by modified iteration method, so the analytic relations between amplitude and nonlinear oscillating frequency for circular sandwich plates were obtained. When circumjacent load makes the lowest natural frequency zero, critical load is obtained.     

ANALYSIS OF THE LOCALIZATION OF DAMAGE AND THE COMPLETE STRESS-STRAIN RELATION FOR MESOSCOPIC HETEROGENEOUS ROCK UNDER UNIAXIAL TENSILE LOADING

The mechanical behavior of rock under uniaxial tensile loading is different from that of rock under compressive loads. A micromechanics-based model was proposed for mesoscopic heterogeneous brittle rock undergoing irreversible changes of their microscopic structures due to microcrack growth. The complete stress-strain relation including linear elasticity, nonlinear hardening, rapid stress drop and strain softening was obtained. The influence of all microcracks with different sizes and orientations were introduced into the constitutive relation by using the probability density function describing the distribution of orientations and the probability density function describing the distribution of sizes. The influence of Weibull distribution describing the distribution of orientations and Rayleigh function describing the distribution of sizes on the constitutive relation were researched. Theoretical predictions have shown to be consistent with the experimental results.     

MICROMECHANICAL MODELLING OF STRAIN SOFTENING IN MICROCRACK-WEAKENED QUASI-BRITTLE MATERIALS

By using the concept of domain of microcrack growth(DMG),themicromechanisms of damage in quasi-brittle materials subjected to triaxial either tensileor compressive loading are investigated and the complete strew-strain relation includingfour stages is obtained from micromechanical analysis.The regime of pre-peaknonlinear hardening corresponds to the distributed damage,i.e.the stable propagationof microcracks.After the attainment of the ultimate strength of load-bearing capacity,some microcracks experience the second unstable growth and the distributed damage istransmitted to the localization of damage.These analyses improve our understanding ofthe hardening and softening behaviors of quasi-brittle materials.     

钛合金TC-4在高应变率下的动态本构关系

利用分离式Hopkinson扭杆对钛合金TC-4进行了高应变率下动态剪切本构关系的实验研究。结果表明TC-4对应变率高度敏感,对应变率的敏感性随应变率的提高而增加。其动态应力应变关系呈线性强化形式。但动态强化模量随应变率的提高而略有减少。采用Malvern给出的过应力模式_p={exp[(1/)(-f())]-1}/b可以较好地描述TC-4的动态剪切本构关系。     

有限变形弹性动力学的非传统Gurtin型变分原理

根据古典阴阳互补和现代对偶互补的基本思想，通过作者早已提出的一条简单而统一的途径，系统地建立了有限变形弹性动力学的各类非传统Gurtin型变分原理，给出一个以卷积表示的重要关系式，可以认为，该式是有限变形动力学的广义虚功原理的表式。从该式出发，不仅能得到有限变形动力学的虚功原理，而且通过给出的一系列广义Legendre变换，还能系统地成对导出5类变量，3类变量，2类变量和1类变量非传统Gurtin型变分原理的互补泛函。通过这条途径还能清楚地阐明这些原理之间的内在联系。     

Shakedown analysis of shape memory alloy structures

Phase transformational shakedown of a structure refers to a status that plastic strains cease developing after a finite number of loading cycles, and subsequently the structure undergoes only elastic deformation and alternating phase transformations with limited magnitudes. Due to the intrinsic complexity in the constitutive relations of shape memory alloys (SMA), there is as yet a lack of effective methods for modeling the mechanical responses of SMA structures, especially when they develop both phase transformation and plastic deformation. This paper is devoted to present an algorithm for analyzing shakedown of SMA structures subjected to cyclic or varying loads within specified domains. Based on the phase transformation and plastic yield criteria of von Mises-type and their associated flow rules, a simplified three-dimensional phenomenological constitutive model is first formulated accounting for different regimes of elastic–plastic deformation and phase transformation. Different responses possible for SMA bodies exposed to varying loads are discussed. The classical Melan shakedown theorem is extended to determine a lower bound of loads for transformational shakedown of SMA bodies without necessity of a step-by-step analysis along the loading history. Finally, a simple example is given to illustrate the application of the present theory as well as some basic features of shakedown of SMA structures. It is interesting to find that phase transformation may either increase or decrease the load-bearing capacity of a structure, depending upon its constitutive relations, geometries and the loading mode.     

The indenter tip radius effect in micro- and nanoindentation hardness experiments.

Nix and Gao established an important relation between the microindentation hardness and indentation depth. Such a relation has been verified by many microindentation experiments (indentation depths in the micrometer range), but it does not always hold in nanoindentation experiments (indentation depths approaching the nanometer range). Indenter tip radius effect has been proposed by Qu et al. and others as possibly the main factor that causes the deviation from Nix and Gao's relationship. We have developed an indentation model for micro- and nanoindentation, which accounts for two indenter shapes, a sharp, conical indenter and a conical indenter with a spherical tip. The analysis is based on the conventional theory of mechanism-based strain gradient plasticity established from the Taylor dislocation model to account for the effect of geometrically necessary dislocations. The comparison between numerical result and Feng and Nix's experimental data shows that the indenter tip radius effect indeed causes the deviation from Nix-Gao relation, but it seems not be the main factor. The project supported by the National Natural Science Foundation of China (10121202) and the Ministry of Education of China (20020003023)     

Difference between the longitudinal Frenkel-Biot waves in water-and gas-saturated porous media

The problem of the propagation of longitudinal Biot waves in a porous medium saturated with a weakly compressible liquid (water) or a gas is considered theoretically. The frequency dependence of the phase velocities and damping coefficients is investigated numerically. It is shown that for a certain relationship between the parameters of the porous medium and the saturating fluid there is a “critical” frequency at which the properties of longitudinal waves of both kinds are identical. An analytical expression for this “critical” frequency is obtained. It is shown that for a gas-saturated porous medium, at a certain frequency, in both longitudinal waves the relative gas-matrix motion changes type. Assuming that the saturating-gas behavior corresponds to an adiabatic equation of state, an estimate is obtained for the threshold pore pressure necessary for the restructuring of the relative motion. The wave associated with matrix deformation is shown to have a high damping coefficient in a porous medium saturated with a weakly compressible liquid (water in the case considered) but to be only weakly damped in a gas-saturated porous medium.     

Quantum topology phase diagrams for molecules,clusters, and solids

The need to make more quantitative use of the total electronic charge density distribution is demonstrated in this short perspective. This is framed in the perspective of the ground breaking early work of Bader and coworkers, along with mathematicians who captured the essential nature of a molecule in a suitably compact form in real space. We see that this simple form is the Poincaré–Hopf relation for molecules and clusters and the Euler–Hopf relation in solids. Thom's theory of elementary catastrophes combined with the Poincaré–Hopf relation provides the inspiration for the new quantum topology. An alternative use of the Poincaré–Hopf relation, molecular recognition, is discussed. Quantum topology is then used to create a topology phase diagram for both molecules and solids. The author adds their perspectives of the huge potential of the quantum topology approach by demonstrating the ease with which new theoretical ideas can be generated. © 2013 Wiley Periodicals, Inc.